AboutOur TeamCall Wittlock Engineering LLC at (256) 737-3075 today.Founded in 2001. Wittlock Engineering LLC is backed with over 50 years of combined industry experience in both fabrication and nesting software. Our company believes the customer should consider more than just software in their buying decision.Although the software is an integral part of their production environment, after sale support is just as important if not more important. We strive to provide the best possible support tailored to our customer needs.Through our commitment, experience, and expertise Wittlock Engineering LLC has established a business relationship with our customers that will last a lifetime!Wittlock Engineering LLC provides Fabrication Software using Key Technology for Burners, Plasma, Punch Presses, Punch Combo, and Laser Machines., great customer support, and prices that can't be beatWittlock Engineering prides itself on training and support.We believe that this is the most important part of your software purchase.No matter what software you may use, having support after the purchase is critical.Below is just a few comments we have received from our customers!
We Exceeded General Kinematics ExpectationsGeneral Kinematics Corporation was in need to replace antiquated and unsupported burning machine software. CAMTECH suggested that WE-CIM would be a perfect fit for our programming and nesting software needs. WE-CIM has reduced our piece part programming times from 15 minutes per part to 2 minutes, and the plate nesting in WE-CIM has cut out scrap rate in half. WE-CIM paid for itself within the first weeks of operation. CAMTECH’s knowledgeable staff provided us with outstanding onsite training and support to insure a trouble free software installation. It is truly a pleasure to work with the professional staff at CAMTECH. They were able to assess our needs, make suggestions and deliver a product that exceeded our expectations.”Dave Weiner, General Kinematics Corporation
Support Makes The Difference
“I would like to thank Wittlock Engineering for your prompt attention to our many questions during our transition to WE-CIM. Several companies offer software that will do the same thing as your product but few offer your level of support after the sale. We are pleased with the product and look forward to future releases." Randy Hancock, Nu-Life Environmental, Inc
WE-CIM Pulls It's Weight At Towing ProductsTowing Products has chosen to use WE-CIM for its Whitney 3500 and 3700 Plasma Punch machines. Not only is the software flexible in its capabilities and able to meet our unique requirements, but the tech support we have experienced from our vendor has been excellent. They had been working with us prior to the purchase of the 3700 and was physically present during the runoff, to ensure that the code was optimal in every way. The service will not end there, as they are already planning to be present during the installation and power up of the machine on our shop floor."
Rittal Chooses WE-CIMRittal Corporation has chosen to use the WE-CIM software over Optimation software that we spent around 120k on. Although we purchased the Building Blocks with very little success we chose to get current with Wittlock Engineering . I can say today Rittal is able to produce code the way we want and if something is not right we now have the capability to change it again. Not trying to make a sales pitch but if you want nesting software with the flexibility to change things like SmartCam WE-CIM is going to be something you want to look at. Greg King - Group Leader Manufacturing Servics, Rittal Corporation